The main outside locker and, to a lesser extent, the gas bottle locker on our Burstner Ixeo Time 585 are letting in water. After the recent high winds and heavy rain in west Cork I found a small swimming pool in the main locker and a puddle on the floor of the gas locker. The rubber seals on the doors appear to be in good condition but it looks like water is overflowing the lip on the lower edge of the locker openings or maybe getting in through the door latches. We didn't have this problem last year but the rain and wind this winter may be more extreme.
There are three interlocking shims behind the locker door latches. I have tried removing one of the shims on each latch in the hope that pulling the door tighter against the rubber seal may solve the problem. It appears to have made no difference on the gas bottle locker and, if anything, made matters worse on the main locker.
Has anybody had a similar problem or any idea what the solution might be? Photos attached of the main locker door, shims removed, latches and rubber seal. I'd be very grateful for any advice before removing more shims or fiddling about further.