Replacement Table Mounting Bracket

 
 
 
 
 
 
Newbie
Avatar
Gender: n/a
Age: 48
Posts: 5
Registered: 12 / 2016
Subject:

Replacement Table Mounting Bracket

 · 
Posted: 16.02.2021  ·  #1
Hi all,
I recently cracked some of the locking tabs in the table mounting bracket (see the attached photo.) Its the bracket or hinge that you use to lift the table up and detach it from the camper inside wall. I've tried a few dealers to get a replacement, to no avail.
Has anyone bought one of these before. I'd presumed they were a standard generic part that's easy to come-by.

Thanks,
Slán
Eoin Fitzgerald
 


Eat's Sleep's craic
Avatar
Gender:
Location: Crossgar
Age: 64
Posts: 2637
Registered: 07 / 2013
My Motorhome: Rollerteam t-line 740
Base Vehicle: Fiat muiltijet
Subject:

Re: Replacement Table Mounting Bracket

 · 
Posted: 16.02.2021  ·  #2
We had a similar setup on our last van it was a chausson and a few of the clips broke of ,it didn’t seem to affect the way the table worked ,I couldn’t get a replacement ether but you may be able to change it to a different system


Eat's Sleep's craic
Avatar
Gender:
Location: kildare
Posts: 6167
Registered: 10 / 2011
My Motorhome: Dethleffs Advantage
Base Vehicle: Fiat 2.3
Subject:

Re: Replacement Table Mounting Bracket

 · 
Posted: 16.02.2021  ·  #3
I had the same in a Chausson, which had a few bits broken too and it still worked, try a Chausson dealer they should have one, don't know if there's one in Ireland though


Eat's Sleep's craic
Avatar
Gender:
Location: Craigavon
Age: 73
Posts: 553
Registered: 06 / 2012
My Motorhome: Rapido 7065FF
Base Vehicle: Fiat Ducato X250 2.3L 130bhp
Subject:

Re: Replacement Table Mounting Bracket

 · 
Posted: 16.02.2021  ·  #4
Eat's Sleep's craic
Avatar
Gender:
Location: Cork
Age: 70
Posts: 1889
Registered: 11 / 2011
My Motorhome: Rapido 963F
Base Vehicle: Ducato 2.8 JTD Power
Subject:

Re: Replacement Table Mounting Bracket

 · 
Posted: 16.02.2021  ·  #5
The missing bits look like they are to stop the table from being able to jump up off the mounting rail.
Could you fashion a couple of pieces from a bit of thin steel bar to screw on in place of the broken off bits


Eat's Sleep's craic
Avatar
Gender:
Location: Tipperary
Posts: 6602
Registered: 02 / 2012
My Motorhome: Knaus Sport Ti 700 UFB Silverline
Base Vehicle: Renault Master 150 dci Quickshift
Subject:

Re: Replacement Table Mounting Bracket

 · 
Posted: 16.02.2021  ·  #6
Newbie
Avatar
Gender: n/a
Age: 48
Posts: 5
Registered: 12 / 2016
Subject:

Cheers for the help

 · 
Posted: 17.02.2021  ·  #7
Thanks for the prompt replies.

I had thought about simply replacing it with a brass hinge, but that does away with the ease of converting it into the bed.
The link sent by CHAUSSON is exactly the part I was looking for. Thank you. I never thought to check Charles camping.
That should get the table sorted in time for the July ferry to France !! Fingers crossed


Eat's Sleep's craic
Avatar
Gender:
Location: Co Wicklow
Age: 89
Posts: 5378
Registered: 01 / 2015
My Motorhome: Matilda 2 Pilote 703FP Explorateur
Base Vehicle: 3ltr 318 Sprinter Automatic
Subject:

Replacement Table Mounting Bracket

 · 
Posted: 17.02.2021  ·  #8
Quote by Eoin Fitz

Thanks for the prompt replies.

I had thought about simply replacing it with a brass hinge, but that does away with the ease of converting it into the bed.
The link sent by CHAUSSON is exactly the part I was looking for. Thank you. I never thought to check Charles camping.
That should get the table sorted in time for the July ferry to France !! Fingers crossed


Always good to look local before the INTER.


Selected quotes for multi-quoting:   0

Registered users in this topic

Currently no registered users in this section

The statistic shows who was online during the last 5 minutes. Updated every 90 seconds.