Shot and Soda Blasting

 
 
 
 
 
 
Craic'er
Avatar
Gender: n/a
Age: 28
Posts: 31
Registered: 10 / 2019
Subject:

Shot and Soda Blasting

 · 
Posted: 12.01.2020  ·  #1
Shot blasting and Soda Blasting services now available at Rusty Nutz.
Soda blasting is especially good for removing paint and rust from vehicle body panels without causing any distortion or harm, and also for engine cleaning. Soda blasting can also be used for removing paint from wood and also cleaning bricks, for example, old brick buildings.

Rustynutz.info


Craic Lifer
Avatar
Gender:
Location: Co. Down
Age: 66
Posts: 1395
Registered: 09 / 2011
My Motorhome: Hymer B598 PL
Base Vehicle: Fiat 130 hp multijet
Subject:

Re: Shot and Soda Blasting

 · 
Posted: 12.01.2020  ·  #2
I have read good reports of soda blasting on boats. I was looking for someone to do my boat (yacht sounds too posh) about 5 years back but nobody seemed to be in that business anywhere in the north.

Wanted to strip back the antifoul. I believe soda blasting is safe on grp (fibreglass). It is environmentally sound apart from the crap removed as far as I can tell. I might look into it again but not sure if the wheel bearings would be good for the round trip. The perils of salt water on trailer wheels.

Might be worth your while circulating a few yacht Clubs, particularly if you can be mobile.

Davy


Craic'er
Avatar
Gender: n/a
Age: 28
Posts: 31
Registered: 10 / 2019
Subject:

Re: Shot and Soda Blasting

 · 
Posted: 12.01.2020  ·  #3
Yes Davy you're correct, it can be used on fibreglass. We are also mobile.

Thanks for the tip, I'll maybe do that 👍

Liked by: eirebus

Selected quotes for multi-quoting:   0

Registered users in this topic

Currently no registered users in this section

The statistic shows who was online during the last 5 minutes. Updated every 90 seconds.