Hi all, I am in Spain using Spanish gas ( with Irish control valve). The last few times changing bottles there has been a problem and I don’t know whether I have the right method in the right order. So here is my method
1) Attach new bottle and turn on the flow regulator to open the bottle.
2) Press the button on the wall valve for 5to 10 seconds to purge system, then release.
3) Meanwhile other half is inside with the gas tap turned on to check for gas, nothing!!!
Have tried different permutations, holding button up for longer, disconnecting bottle and going through the whole process again, still no joy.
Am sure that the gas is coming from the bottle to the wall valve.
The hose is 1 year old, the bottle regulator is the same and it is the correct bottle regulator.
All connections are tight and no gas leak smell in locker or camper.
Any suggestions, ideas would be appreciated as it’s doing my head in.
Thanks
1) Attach new bottle and turn on the flow regulator to open the bottle.
2) Press the button on the wall valve for 5to 10 seconds to purge system, then release.
3) Meanwhile other half is inside with the gas tap turned on to check for gas, nothing!!!
Have tried different permutations, holding button up for longer, disconnecting bottle and going through the whole process again, still no joy.
Am sure that the gas is coming from the bottle to the wall valve.
The hose is 1 year old, the bottle regulator is the same and it is the correct bottle regulator.
All connections are tight and no gas leak smell in locker or camper.
Any suggestions, ideas would be appreciated as it’s doing my head in.
Thanks